AOP

OZONE + UV-C IN ONE SYSTEM

Introducing a total game-changer in commercial water sanitizers. The Advanced Oxidation Process (AOP) combines Ozone and UV-C to create a powerful sanitizer that is more than the sum of its parts. With the use of AOP microorganisms are destroyed, chloramines are broken down and chlorine dependence is significantly reduced. Non-organic contaminants are also oxidized and water clarity is fully optimized.

AOP Technology

Through the combination of Corona Discharge Technology, Germicidal UV Light, and Advanced Plasma Gap technology, the AOP lineup provides Advanced Oxidation Process in truly robust units.

  • Destroys 99.9% of Harmful Contaminants
  • Oxidizes Cryptosporidium parvumGiardia, and Other Chlorine Resistant Microorganisms
  • Reduces Chemical Demand
  • Increases Effectiveness of Residual Sanitizers
  • Eliminates Chemical Odors, Irriration, and Damage to Pool System
VIEW AOP PRO PRODUCTS
THE SCIENCE OF AOP

When germicidal UV light (UV-C) and ozone react the result is the production of hydroxyl radicals. This reaction is known as Advanced Oxidation Process, or AOP. Hydroxyl radicals (•OH) are the most powerful oxidation agents available, quickly destroying bacteria, viruses, pathogens and other contaminants that occur in water.

THE POWER OF AOP

AOP is dramatically more powerful than Chlorine and other sanitizers, and even more powerful than Ozone alone. When Ozone and UV-C react, the result is far greater than the sum of it’s parts.

THE ADVANTAGES OF AOP

AOP Systems outperform alternatives at a lower cost, and improve performance of other system equipment.

DEL AOP PRO SYSTEMS

There are two distinct AOP system options from DEL to properly match your specific sanitizer requirements. Systems can be sized by required flow rates, with options including full PLC control.

  • Certified to NSF/ANSI Standard 50 as a Supplemental Sanitizer
  • Typical System Cost 50% Less than a Properly Sized Ozone System
  • Simple, Economical Annual Service Requirements

AOP PRO 50, 100

  • Self-contained “system in a box”
  • Flow rates up to 100gpm
  • Ambient air oxygen feed
  • Optional PLC control

AOP PRO 200, 350, 500

  • High-flow systems up to 500gpm
  • PLC Control Screen fully integrated
  • Integrated O2 Concentrator
CLEAN, CLEAR & SAFE: DESIGNING A COMPLETE MODERN POOL™

A modern pool is about complete system design that allows each component to operate at peak performance. Every piece contributes to water that is safe, clean and clear. The addition of AOP is the final component needed on many bodies of water to take water quality to the next level.

DESTROY WHAT CHLORINE MISSES IN A FRACTION OF THE TIME

Advanced Sanitizers like AOP are excellent for destroying or inactivating dangerous contaminants that can be present in any pool. They are effective on microorganisms, viruses, bacteria and other pathogens. AOP also breaks down biofilm inside filters and plumbing that chlorine cannot touch. And unlike chlorine, AOP is effective in a wide pH range.

IMPROVE CHLORINE PERFORMANCE

AOP is the most powerful oxidizer available for pool sanitization. AOP continuously “shocks” the water, reducing the organic load and freeing up chlorine to focus on sanitizing the water.

Chlorine is hindered by chloramine build-up in the water. AOP rapidly destroy chloramines, freeing up available chlorine. Chloramine removal also eliminates bad pool smells and increases bather comfort.

ENHANCED SYSTEM FILTRATION

AOP acts as a micro-flocculent in the water, trapping small particles that would otherwise bypass the filter. This process also increases filter media efficiency by breaking up biofilm that gather inside the equipment.

CHECK OUT AOP PRO PRODUCTS